Aegis Boost 2 B60 Pod Mod Kit by GeekVape is a durable pod vape kit that can handle a little man-handling with its IP68 rating of water, dust and shock resistance, and quick-lock switch. Luckily, the Geek Vape Aegis Boost 2 B60 also vapes incredibly well, successfully delivering both mouth-to-lung (MTL) and direct-lung (DL) draws. The Aegis Boost 2 B60 Pod Vape Kit’s leak-proof, top adjustable airflow, and pre-set and adjustable modes help deliver spot-on vaping through its 5mL vape juice capacity Aegis Boost 2 Pod and its tasty GeekVape B Series Coils!

Quick-lock your Aegis Boost 2 B60 Mod

One flick of a switch is all you do to lock all the buttons of your Geek Vape Aegis Boost 2 B60 Mod and safely carry it in your pocket or bag! The popular, convenient and ingenious A-Lock switch which also features on the Aegis Boost 2 B60’s cousin, the Aegis Legend 2 Kit, made its way to this smaller vape kit for your safety and convenience. More clever features of the Aegis Boost 2 B60 Mod include:

  • BEAST Mode – it recognises the coil installed and automatically gives you draws at the maximum power the coil can handle. You can’t change wattage, in fact, you can’t even see the wattage but you can taste the beastly, tasty vapour flavour and feel the large vape clouds you receive.
  • Smart Mode – although this mode features on lots of other vape kits (it’s core feature being that it recognises the coil and sets a recommended wattage for you) the Aegis Boost 2 B60 takes this one step further and actually stops you from going above or below the wattage range the coil can handle. Coil longevity, yo!
  • More modes – the standard Power Mode, plus more advanced temperature control modes are also available to fine tune your vaping.
  • Consistent output – same level of vapour and power in draws regardless of battery level.
  • Tri-proof durability – the Geek Vape Aegis Boost B60 lets you vape with ease, knowing that it can handle being accidentally dropped, dirty or wet.
  • 60W – enough to power all GeekVape B Series Coils.
  • Go stealth – press the fire button, and up and down wattage buttons together to turn off your screen and lock the wattage buttons but still vape.
  • Grip stand – the bottom of your Aegis Boost B60 Pod Vape Kit is a silicon pad to provide grip when placed upright.
  • 2000mAh battery – built-in to the mod which should last you most or all day depending on how much and what wattage you vape; the higher the wattage used, the quicker your battery is used up.
  • Leather grip – along with killer vape clouds, you can enjoy a comfy hold with the Aegis Boost 2 B60’s soft leather panel.
  • Smaller and lighter than its Aegis Boost predecessors.
  • Simple navigation – there’s no separate menu screen! Simply click the fire button three times and use the up/down buttons to scroll through your mode options.

The leak-proof Aegis Boost 2 B60 Pod

You seldom see airflow adjustability on an actual pod but the GeekVape Aegis Boost 2 B60 Pod has just that! In fact, having top airflow control on the pod is what makes it more leak-proof while upright as there are no airflow holes for your vape juice to escape from the bottom! Oh but there’s more brilliant features on the Geek Vape Aegis Boost 2 B60 Replaceable Pod:

  • Real adjustable airflow – the positioning of the adjustable airflow control makes it incredibly accurate as air inflow has easier access to the coil. This is one of the main reasons you can get both tight MTL vaping as well as open DL draws from this small pod vape kit.
  • Rich in vapour flavour and vape clouds – the GeekVape B Series Coils do not disappoint when it comes to delivering down-right delicious vapour flavour and pretty big clouds for a vapouriser this size.
  • Easy top fill – no need to remove the Aegis Boost 2 B60 Pod from the mod to fill with e-liquid, just lift the rubber plug at the top of the pod and fill with ease.
  • 5mL e-juice capacity – big clouds and great flavour call for a large pod size and 5mL vape juice capacity is pretty decent for a compact pod kit.
  • East-to-clean drip tip – the oval mouthpiece (drip tip) is removeable and while it’s not a standard 510 size that can be replaced with generic 510 drip tips, it certainly makes it easy to keep clean!
  • Secure connection – strong magnets keep the GeekVape Aegis Boost 2 B60 Pod in place, even if you drop it.
  • Quick coil change – a simple pull out of the old coil and plug in of the new from the bottom of the pod gets you back to vaping deliciousness ASAP.
  • MTL vaping – slide that airflow control lever to restrict the draw and experience a tight, satisfying MTL draw that’s similar to that of a cigarette, where vapour is held in the mouth briefly before inhaling to the lungs.
    • Best achieved with included 0.6 ohm coil or other low-wattage, high-resistance B Series Coils.
  • DL vaping – open that airflow lever right up and vape like your breathe, inhaling vapour straight to your lungs for large vape cloud production.
    • Best achieved with included 0.2 ohm coil or other high-wattage, low-resistance B Series Coils.

You can actually have the best of both MTL and DL vaping worlds with the GeekVape Aegis Boost 2 B60 Pod Mod Vape Kit! You may not get the room-filling, gigantic, super-warm vape clouds that you’d get from a more powerful (and more expensive) vapouriser but you’re going to be pleasantly surprised with the vape cloud size and vapour flavour from this little vape kit. Plus, it can handle clumsy people (like a few of us at Vape World) who tend to drop their vape (okay, it’s me, the person writing, I drop and break my tanks…).

Please note:

  • Remember to prime new coils before using so you don’t get dry hits or burn your coil too quickly. Prime the coils by dropping some vape juice in the centre of the coil to saturate the cotton. Install the coil, fill the pod and as an extra precaution, let it sit for five minutes before vaping.

Geek Vape Aegis Boost 2 B60 Pod Mod Kit Specifications:

  • Stunningly leak-proof pod design
  • Intelligent working modes by AS-Chip
  • 0.96-inch LED curved display
  • A safer carry with A-lock (quick-lock switch)
  • Tri-proof (water, dust and shock resistant)
  • Dimensions: 71.6 x 25.9mm
  • Material: zinc-alloy, leather and silicone
  • Battery capacity: 2000mAh, built-in
  • E-liquid capacity: 5mL
  • Voltage output range: up to 7.5V
  • Max power: 60W
  • Coil: mesh
  • Coil resistance: 0.2 and 0.6 ohm
  • Charging: USB Type-C port
  • Charging voltage: 5V
  • Refill method: top fill
  • Airflow control via easy access airflow valve

Package Includes:

  • GeekVape Aegis Boost 2 B60 Pod Mod
  • GeekVape Aegis Boost 2 B60 Replacement Pod (5mL)
  • GeekVape B Series 0.2 ohm Coil (pre-installed)
  • GeekVape B Series 0.6 ohm Coil
  • Coil tool
  • USB Type-C charging cable
Geek Vape | Vape World Australia | Vaping Hardware

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Geek Vape Aegis Boost 2 B60 Pod Mod Kit

$59.95
delivery truck
Order by 1pm AEST for same day dispatch*

You may also like