Vaporesso Luxe Q2 SE Pod Kit

Luxe Q2 SE Pod Kit by Vaporesso is a quality-built, user-friendly pod vape kit that’s designed to make your vape-life easy, starting with its 30-minute rapid charge of a 1000mAh battery that lasts you over a day. While the Vaporesso Luxe Q2 SE Pod Kit shares many features with its very-similar bud, the Vaporesso Luxe Q2 Pod Vape Kit, it’s easier to use and comes with a lanyard but is compatible with the same 3mL e-juice capacity Vaporesso Luxe Q Replacement Pods which provide great vapour flavour and on-point mouth-to-lung (MTL) draws.

More where this Luxe Kit came from

There’s more than one Vaporesso Luxe Q Pod Kit which are usually released in pairs:

• This Luxe Q2 SE Pod Kit and Luxe Q2 Pod Kit: same in almost every way except the Luxe Q2 comes with two pods, has an adjustable airflow slider and leather grip panels.
• The original Luxe Q Pod Kit and Luxe QS Pod Kit: identical in every way except the Luxe QS has a holographic, coloured, textured panel.

Beginner-friendly Luxe Q2 SE Battery

If you’re looking for a vapouriser that doesn’t require much vape know-how and is almost as easy to vape as boiling an egg, the Vaporesso Luxe Q2 SE Battery will tick all your boxes. Actually, the entire Vaporesso Luxe Q Vape family would too, with some only having a few extra features but nothing that makes them extremely complicated! More features of the Vaporesso Luxe Q2 SE Vape Battery are below:

• Small size for an easy carry – place the Luxe Q2 SE Vape in your pocket, bag or clutch because it’s compact in size and without buttons, there’s no need to worry about accidental fire button pushes.
• Easy to use – no buttons or complicated settings.
• 1000mAh battery – vape all day on a single charge (unless you chain vape).
• 2A rapid charge – charged in only 30 MINUTES with the included Type C cable! Half the time of the earlier Luxe Q and Luxe QS Pod Kits.
• Auto-draw vaping (inhale-activated) – just fill the Luxe Q Pod with e-juice and draw on the mouthpiece to vape.
• Insta-fire – Luxe Q2's Axon Chip instantly produces vapour the moment you draw.
• Quality make – Vaporesso Luxe Q2 Vape feels and looks sturdy.

Surprising flavour from Luxe Q Pods

Let’s face it, vapour flavour isn’t always superb from low-wattage vaping devices with disposable pods but the Vaporesso Luxe Q Pod Replacements break the mould. Every puff delivers the flavour of your preferred vape juice accurately! More Vaporesso Luxe Q Replacement Pod features to make your vape-life easy are below:

• Good vapour flavour and throat hit - built-in coil of Luxe Q Pod is made with Corex Heating Tech that boosts vapour flavour and prolongs the pod’s life.
• 3mL e-liquid capacity – vape longer between re-fills.
• Disposable – throw out the pod when the built-in coil has reached the end of its life (causes leaking, less vape clouds, bad vapour flavour…).
• Side fill – remove Luxe Q Pod from the Luxe Q2 SE Battery, lift the rubber plug on the side to reveal the fill port and fill with your favourite e-liquid.
• See-through pod – easily monitor your e-liquid level to avoid vaping on an empty pod that may prematurely burn your built-in coil.
• Strong hold – Luxe Q Pod Replacements securely connect to Luxe Q2 SE Vape so they don’t move in transit.
• One pod included – 0.8 ohm for warm vapour, medium vape cloud production and great vapour flavour. You can also get the:
• 1.0 ohm 3mL Luxe Q Pod (sold separately) – cooler vapour, nice flavour, low cloud production with more restricted draw.
• 0.6 ohm 3mL Luxe Q Pod (sold separately) – warmest vapour, boost in flavour, medium cloud production and slightly looser draw.
• Compatible with ALL Luxe Q Pods – both 2mL, top-filling pods and 3mL, side-filling pods can be used with your Luxe Q2 SE Pod Kit. See our Vaporesso Luxe Q Pod Replacement description for more information on the different pods.
• SSS leak-resistant technology in the pod which stands for:
• seal comprehensively with the o-rings that keep the air pressure in for a tighter draw
• store safely with extra seal that may prevent the Luxe Q Pod leaking while not being used
• saturate properly via the large coil openings to the cotton to avoid burning the coil or getting a dry hit (aka helps prime coil and keep the cotton wet while vaping).
• MTL draws – inhale vapour to your mouth, hold, then draw to the lungs like you used to puff on the old, stank cancer stick. The included 0.8 ohm Luxe Q Pod will give you a mid-resistance MTL draw (not super tight but not loose either).

Please note:

• Take sticker off from the bottom of installed pod before using.
• It's essential to prime new pods before vaping.
1. Remove pod from Luxe Q2 SE Battery.
2. Lift the rubber plug on the side to reveal fill port.
3. Fill pod with vape juice.
4. Replace the rubber plug over the fill port.
5. Cover the air holes at the bottom of the pod with your finger while gently taking about five short draws on the mouthpiece. This draws e-liquid to the built-in coil’s cotton to saturate it and avoids getting dry hits or prematurely burning your coil. You can also let it sit for five minutes.
6. Install the pod on the battery and vape.

Vaporesso Luxe Q2 SE Pod Kit Specifications:

• Size: 96.7 x 17.5 x 27.4mm
• Vapour e-liquid capacity: 3mL
• Battery: 1000mAh, built-in
• Corex Technology for accurate vapour
• SSS Leak-resistant Technology
• Disposable pods (not entire kit)
• Draw-activated vaping (auto-draw, no buttons)
• Super easy to use, good for beginner vapers
• Type-C USB port, 5V
• 2A fast-charge in only 30 minutes!

Package includes:

• Vaporesso Luxe Q2 SE Battery
• Vaporesso Luxe Q Mesh 3mL Pod (0.8 ohm, pre-installed)
• Type C charging cable
• User manual
• Warranty card
• Lanyard