Vaporesso Gen Fit 40 Kit with iTank X

Gen Fit 40 Kit with iTank X by Vaporesso gives you mouth-to-lung (MTL) and restricted direct-lung (RDL) vaping in a compact, low-wattage (40W) mod and tank vape kit. The Vaporesso iTank X is a small, 3.5mL e-juice capacity tank that’s built for restricted draws with its slim drip tip and accurate, pin-hole adjustable airflow, and great vapour flavour from its replaceable Vaporesso GTX Coils. It’s partner, the Vaporesso Gen Fit 40 Mod, gives you three modes to adjust your vape settings via three buttons and a discreet display screen with all your vape settings positioned uniquely on top, next to the iTank X.

If this all sounds great to you but you want an even simpler mod and tank vapouriser kit, without adjustable wattage or modes, check out its close relative, the Vaporesso Gen Fit Kit with iTank M who even gives you the option of auto-draw vaping without using the button!

Top display on the Gen Fit 40 Mod?

Yes! The Vaporesso Gen Fit 40 Vape Mod has a discreet, small, black and white display screen right next to your iTank X. The screen is small but crisp so you can see your vape settings clearly (like wattage and battery level). More features that simplify your vape life when using the Gen Fit 40 Mod are listed below:

• 40W of power – it’s really all you need to get a great MTL or RDL draw from the majority of available Vaporesso GTX Coils.
• 2000mAh battery – built-in to the Gen Fit 40 Mod for most or all-day vaping, depending on how much you vape and the coil/wattage you use.
• Three-click safety lock – disable your buttons by triple-clicking the fire button for a safer carry and child safety.
• Minimalist design – uncomplicated operation with only three buttons; one fire button, and up and down buttons.
• Easy mode access – hold the up and down buttons together to access a menu of three modes – Smart Variable Wattage (VW), VW and Variable Voltage.
• Smart VW – does the thinking for you by identifying the coil installed in your iTank X and setting a recommended wattage automatically.
• Compact – for a mod and tank kit, the Gen Fit 40 Mod is relatively small and easy to carry (remember to lock buttons or turn off your mod so you don’t accidentally fire or change wattage while in transit).

The fit-for-purpose iTank X

The Vaporesso iTank X is not the same as the smaller iTank M nor the larger iTank vape tanks. It’s the ‘Goldilocks’ version of the two, built for the purpose of delivering a cigarette type of draw which is more restricted. Plus, it's the only one of the three to use GTX Coils. The iTank X’s design, from its slim drip tip to the accurate airflow adjustment, fit the purpose of restricted draws that you’ll see when reading all its features:

• Slim drip tip – 510 drip tip has a slim bore for controlled, restricted MTL or RDL vaping and is removeable for easy cleaning.
• Mid to high resistance (ohm) coils – the compatible Vaporesso GTX Coils included give you both high and mid resistance (ohm) coils. Low-wattage and high-resistance vaping gives you cooler draws and a longer lasting battery life, while lower-resistance vaping gives you a boost in vapour flavour and clouds, warmer vapour but can go through your battery a little quicker.
• Tested GTX Coils – since GTX Coils have been around the vape block and are compatible with so many other Vaporesso devices, you know to expect quality vapour flavour and performance, and a wide selection to choose from.
• Very precise airflow adjustment – a number of small holes behind the airflow ring at the bottom of the tank allow you to fine-tune (tighten or loosen) your draw to a tee.
• 3.5mL e-liquid capacity – all you need for low-wattage vaping.
• Low-to-medium vape clouds production – lower from lower-wattage coils and higher from higher-wattage coils.
• Top fill – open the iTank X’s top cap with a quarter turn and fill with vape juice from the fill port next to the centre coil slot.
• Simple coil change from the bottom – unscrew base, pull out the old coil and plug in the new, pressing it firmly in place.
• SSS leak-resistant technology 2.0 in the tank which stands for:
• seal comprehensively with the o-rings that keep the air pressure in for a tighter draw
• store safely with extra seal that may prevent leaking while not in use
• saturate properly via the large coil openings to the cotton that avoid burning the coil or getting a dry hit (that is, it helps prime coil and keep the cotton wet while vaping)
• self-cleaning since it revapourises any condensation at the bottom of the tank, self-circulating it so that it minimises leakage and reduces e-liquid waste.
• MTL vaping – where you draw vapour to your mouth, hold, then inhale to your lungs, is perfect in the Vaporesso Gen Fit 40 Kit. It has all the features to produce satisfying MTL draws – tight yet adjustable airflow, low-wattage, high-resistance GTX Coil options and a thin bore drip tip.
• RDL vaping – where you inhale vapour directly to the lungs with some restriction is also possible with the Gen Fit 40 Kit’s versatility in coil choices (choose higher-wattage, lower resistance for RDL), looser airflow adjustment and mode selection.

While simplicity is the essence of the Vaporesso Gen Fit 40 Kit with iTank X, it still provides you with some versatility to tailor your vaping using the airflow, wattage and GTX Coils choice. For us, the fact that the Gen Fit 40 Vapouriser is compatible with the awesome, flavoursome GTX Coils makes it a winner already.

Please note:

• Turn the Gen Fit 40 Kit off (five clicks of power button) when carrying in your pocket or bag to prevent accidental presses of the fire button.
• It's essential to prime new coils before vaping.
  1. Place a few drops of vape juice in the coil centre.
  2. Install the coil in the tank and fill with vape juice.
  3. Replace the tank top cap.
     
  4. Fully close the airflow with adjustment ring at the bottom of the tank, wrap your finger around to block all airflow, then gently take about five short draws on the drip tip. This draws e-liquid to the coil’s cotton and saturates it to avoid getting dry hits or prematurely burning your coil.
  5. Install the tank on the mod and vape.

Vaporesso Gen Fit 40 Kit Specifications

• Dimensions: 117.9 X 32.25 X 22.53mm
• Battery: built-in 2000mAh
• Output wattage: 5-40W
• Charge current: 2A via Type-C port
• Coil compatibility: Vaporesso GTX Coils
• 0.42 black and white OLED screen
• 3.5mL e-liquid capacity
• Top fill
• Removeable 510, slim drip tip
• Adjustable airflow and wattage
• MTL and RDL draws
• Three modes: Variable Voltage, Variable Wattage (VW) and Smart VW.

Package includes

• Vaporesso Gen Fit 40 Mod
• Vaporesso iTank X (3.5mL)
• Vaporesso GTX 1.2 ohm Mesh Coil
• Vaporesso GTX 0.6 ohm Mesh Coil
• Extra glass tube
• Type-C USB charging cable
• User manual
• Warranty card