Geekvape Aegis Eteno E100 Pod Mod Kit
Aegis E100 Eteno Pod Mod Vape Kit by GeekVape is for vaping enthusiasts looking for a compact and powerful device. The kit includes an Eteno E100 Pod with large 4.5mL e-juice capacity that’s perfect for direct-lung (DL) vaping with its 810 drip tip, top airflow adjustment and sub ohm Geek Vape P Series Coils. While powerful, the Eteno Replaceable Pod is easy to maintain with top fill and simple coil change. The Geek Vape Eteno Mod, a comfortable and ergonomic device, produces up to 100W of power and is compatible with an 18650 battery. The Eteno E100 Mod also features a quick-lock switch for convenience and added safety, and an IP68 rating of water, dust and shock proof for durability which makes it a long-lasting vapouriser.
Aegis Eteno Mod is comfy but powerful
The GeekVape Aegis Eteno E100 Mod will give you the large vape clouds you’re looking for but it’s also very comfortable to hold. It has a perfect width that you can wrap your hand around as if holding a sword (as you would do on a daily basis) and the cushioned panel adds to the hand comfort. Yeah, yeah, it’s not all about the hold, how does it vape? Amazingly well with the following features:
- Easy navigation – switch between modes with three clicks of the fire button.
- Pre-set modes – Power Mode, Smart Mode, and BOOST Mode for a tailored vaping experience:
- Boost Mode – automatically gives you draws at the maximum power the coil can handle. You can’t change wattage, in fact, you can’t even see the wattage but you taste the beastly, tasty vapour flavour and feel the large vape clouds.
- Smart Mode – recognises coil and sets recommended wattage for you.
- Advanced modes – Temperature control and VPC to fine-tune your vaping experience futher.
- Removeable 18650 battery (not included) - allows you to swap out batteries to continue vaping and charge them separately with a battery charger.
- Secure battery door – a screw-in battery cap at the bottom of the mod securely holds in and protects your battery from water, dust and escaping when dropped.
- Tri-proof durability – the Geek Vape Aegis Eteno E100 Mod lets you vape with ease, knowing that it can handle being dusty, wet or accidentally dropped.
- Upright charging – convenient Type-C charge port lets it charge standing up.
- 100W – enough to power all GeekVape P Series Coils.
- Quick-lock – one flick of the switch on the side conveniently locks all your buttons for safety (can't vape when locked).
- Bright, clear screen – see your settings clearly.
- Good looks – beautiful colour selection with a style to suit every vaper. We’re lovin' that race-car red!
Top airflow Eteno E100 Mod
Enjoy a more leak-proof vaping experience with the Geek Vape Eteno E100 Pod! The top airflow adjustment means that leaks are minimised when compared to bottom airflow where e-liquid tends to escape because of, well, gravity. That’s not all you’ll love about the Eteno E100 Replaceable Pod with features like these:
- Intense adjustable airflow – enough air intake to accommodate deep DL draws.
- Superb vapour flavour – GeekVape P Series Coils ensure high power and great-tasting vapour.
- 810 drip tip – fit for purpose with a wide bore for maximum vapour intake and removeable so you can clean it easily.
- Secure – strong magnets hold it on the Aegis Eteno Mod while providing convenient removal for a coil change – no unscrewing needed.
- Effortless coil change – remove the pod from the mod, pull out the old coil and plug in the new from the bottom. Simple.
- Convenient top fill – quarter-turn the Eteno Pod’s top cap and fill via one of the two large fill ports on either side of the coil hole.
- See all your vape juice – transparent tube allows for easy e-liquid monitoring; keep vape juice above the coil’s cotton cut-outs for best vaping and coil longevity.
- Durable plastic tube – won’t break as easy as glass if dropped.
- Converts to a vape tank – purchase the Eteno E100 510 Adapter to convert the Eteno Pod into a pod tank and use it with other vape mods!
- DL vaping – vape like you breathe, inhaling vapour straight to your lungs for large vape cloud production. The sub-ohm, high-wattage P Series Coils, ample airflow, wide drip tip, 100W power and modes to tailor your vaping contribute to a very pleasurable DL vaping experience with the Aegis Eteno Pod Mod Kit.
With great power comes great responsibility. Yeah, we watched Spider-Man recently… But it applies to powerful vapourisers. The 100W GeekVape Aegis Eteno E100 Pod Mod Kit gives you power but adds safety with its A-Lock switch, easy navigation, upright charging and secure battery door. All that so you can enjoy the power in a compact vape kit.
Please note:
- The mod is water, dust and shock proof but the Eteno E100 Pod is not.
- We don’t recommend this kit for beginner vapers or those who like mouth-to-lung (MTL) vaping.
- It's essential to prime new coils before vaping.
- Place a few drops of vape juice in the coil centre.
- Install the coil in the pod.
- Remove top cap and fill with vape juice.
- Screw top cap back on the pod.
- Cover the air holes at the bottom of the pod with your finger while gently taking about five short draws on the mouthpiece. This draws e-liquid to the coil’s cotton to saturate it and avoids getting dry hits or prematurely burning your coil.
- Install the pod on the mod and vape.
Geekvape Aegis Eteno E100 Pod Mod Kit Specifications:
- Dimensions (with pod attached): 134.50 x 33 x 39.56mm
- Vape juice capacity: 4.5mL
- Coil resistance of Geek Vape P Series Coils included:
- 0.2 ohm - 60-70W
- 0.4 ohm - 50-60W
- Coil material: mesh KA1 (kanthal)
- Pod material: PCTG plastic (BPA-free)
- Output power: 5-100W
- Battery: 18650, replaceable - not included
- Stunningly leak-proof design with top airflow control
- IP68 rating
- DL vaping ability
- 1.06 inch colour OLED screen
- Intelligent modes on AS-Chip 3 (Smart, Boosting, Power, VPC and Temperature Control - nickle, titanium, stainless steel)
Package Includes:
- GeekVape Aegis Eteno E100 Mod
- GeekVape Eteno E100 Replacement Pod (4.5mL) with P Series 0.2 ohm Coil (60-70W, pre-installed)
- GeekVape P Series Coil 0.4 ohm (50-60W)
- Coil tool
- Spare parts pack
- USB Type-C charging cable
This product does not contain nicotine.
Choose options