Geek Vape AU Aegis U Pod Kit

Aegis U (AU) Pod Starter Kit by GeekVape is perfect for novice vapers since it is extremely easy to vape with! Without pressing a single button, you just draw on the GeekVape U Pod’s mouthpiece (auto-draw) after filling it with 2mL of vape juice. You’ll be mouth-to-lung (MTL) or restricted direct-lung (DL) vaping at low wattage the majority of the day with the GeekVape AU Pod Kit’s 800mAh built-in battery that's also crack resistant. The disposable U Pods can go through 10mL of e-liquid (or five refills) before you discard them too, making the Aegis U Pod Kit efficient, cost-effective and a pleasure to vape with.

Aegis U Battery is about comfort

The GeekVape Aegis U or AU Battery (the bottom part of the pod kit) has a very simple design at first glance. Then you hold it and realise your hand is in heaven with the cool aluminium body, soft leather panel and rubber on the bottom that ooze comfort as you vape. Geek Vape sure know how to make a good-looking and practical vapouriser with features that demonstrate its simplicity:

• Incredibly easy to use – fill the pod with vape juice and draw on the mouthpiece to vape! No buttons or settings to complicate your vape life, making it a beginner-friendly vaping kit.
• Draw-activated vaping – the GeekVape AU Battery senses when you’re drawing and automatically produces vapour.
• Easy to carry – no buttons, light weight and small body means it fits in your pocket, bum bag or purse with ease AND you don’t have to worry about turning it off or it accidentally firing (since it has no buttons to fire with).
• 800mAh battery – not the largest we’ve seen in simple pod kits but good enough to power either U Pod Cartridge for most of the day on its low wattage.
• Smarty-pants – the Aegis U Battery knows which pod you install and changes the wattage automatically without you lifting a finger!
• Tri-proof protection – while it’s not IP67 or IP68 rated (water, dust and shock proof) like other GeekVape Aegis vapourisers, the Aegis U Battery can withstand some spills and splashes of liquid but can’t be submerged. It’s also crack and shock resistant from light drops and knocks.
  
• Good quality build – looks and feels durable.

Simple U Pod does the job

The GeekVape U Pod Cartridge is the simplest way to enjoy vaping since it requires no other experience to use it other than learning how to fill it with e-liquid. Simplicity doesn’t mean you won’t get satisfying vaping though. Check out all the U Pod features and you’ll see what we mean:

• Mellow vapour flavour and good throat hit – the built-in 0.7 or 1.1 ohm coils of the U Pod Cartridges give you decent vapour flavour and low vape clouds (warmer from 0.7 and cooler vapour from 1.1 ohm).
• Clear-view pod – see your e-juice level to keep it above the cotton openings of the built-in coil for pod longevity and you may avoid accidentally burning your coil that can happen when accidentally vaping on an empty pod.
• Lip comfort – a duck-billed mouthpiece gives you comfortable vaping with its slim top edge that suits your lips.
• Secure connection – magnets keep your Geek Vape U Pod in place securely.
• 2mL vape juice capacity – goes the distance when you’re low-wattage vaping the Aegis U Pod Kit.
• Semi-convenient side fill – take pod out of the AU Battery, lift rubber tab located on the side of the pod and fill with e-liquid.
• Disposable – keep refilling the U Pod Cartridge until you can vape no more, then dispose and replace it with a brand-new pod! You’ll know when it’s time for a change if your vaping has become bad-tasting, it’s leaking or has significantly less vape cloud production.
• At least five refills per pod – each U Pod Cartridge will go through a minimum of 10mL (on average), or five refills, before needing replacement.
• Cross-compatible – GeekVape U Pods can also be used with the Sonder U Pod Kit and possibly more simple vape kits in the future!
• MTL vaping – the low-wattage, higher-resistance built-in coil of the U Pod combined with the small air inlet holes of the Aegis U Battery let you loosely MTL vape with both 0.7 or 1.1 ohm pods, where you hold vapour in your mouth, then inhale to the lungs (as you’d smoke a ciggie but without the putrid smell). If you like tighter MTL draws, you can cover the air hole with your finger as your draw.
• RDL vaping – the mid-range resistance (ohm) of the built-in 0.7 ohm coil and very slightly loose air intake also give you the option of RDL draws (inhaling vapour directly to you lungs with restriction, like breathing in through your vape kit).

There’s not much to the GeekVape Aegis U Pod Kit in terms of complexity. It’s easy to vape with, even if you don’t have much vaping experience, is more durable to handle bumps and bruises, and most of all, you can take it anywhere you go without it weighing down your pocket.

Please note:

• It's essential to prime new pods before vaping:

1. Fill the pod with e-liquid and close the rubber plug.
2. Cover the air holes at the bottom of the pod with your finger while gently taking about five short draws on the mouthpiece. This draws e-liquid to the coil’s cotton to saturate it and avoids getting dry hits or prematurely burning your coil. You can also let the pod sit for five minutes after filling as an extra precaution.
3. Install the pod on the battery and vape.

Geek Vape AU Aegis U Pod Kit Specifications:

• Size: 94.62 x 26.6mm
• E-liquid capacity: 2mL
• Power output: up to 20W
• Weight: 48.3g
• Battery: 800mAh capacity, built-in
• Coil resistance: 0.7 ohm & 1.1 ohm
• Charging port: Type-C USB
• See e-juice level with ‘clear-view’ pod
• Auto-draw vaping
• Simple to use, good for beginner vapers
• Pod fills from side
• MTL and RDL draws

Package Includes:

• GeekVape Aegis U Battery/Device
• GeekVape U Pod Cartridge 0.7 ohm (16-19W)
• GeekVape U Pod Cartridge 1.1 ohm (9-12W)
• Type-C USB charging cable