Geekvape Sonder Q Pod Kit

Sonder Q Pod Starter Kit by Geek Vape can be your daily travel vape or your beginner vaping device because it’s ridiculously easy to use and carry. Simply fill the disposable, 2mL vape juice capacity GeekVape Q Pod Cartridge from the top, place it in the Sonder Q Battery and RDL (restricted direct-lung) or MTL (mouth-to-lung) vape all day on its 1000mAh built-in battery by just drawing on the mouthpiece (auto-draw). Plus, the Geek Vape Sonder Q Pod Vape Kit has adjustable airflow to tailor your draw but there are no buttons, menus or other settings to worry about. Easy peasy.

Sonder Q’s version of the electric slide

Okay, so maybe not THE electric slide dance but the Geek Vape Sonder Q Pod Kit's airflow adjuster sliiiides to increase/decrease airflow which tightens or loosens your draw. And it’s really up to you if you even want to adjust the draw. More easy features of the Sonder Q Battery/Mod, which is quite similar to its relative, the GeekVape Sonder U Pod Kit, are below:

• Easy to use – fill the pod and draw on the mouthpiece to vape! Super beginner-friendly vaping kit.
• Easy to carry – chuck the light-weight (39.1g), compact Sonder Q Vape Kit in your pocket or bag without a worry since there’s no button to accidentally press.
• Auto-draw (draw-activated) vaping – the Sonder Q automatically produces vapour as you draw for easy vaping.
• Adjustable draw – open or close (or something in between) the airflow slider to tighten or loosen your draw.
• Textured plastic body – while you enjoy the vape, your hands enjoy the textured Sonder Q body, like they’d enjoy a fidget spinner.
• Pocket-friendly – really affordable starter vape kit. That being said, you only get one pod and no charging cable in the kit.
• ‘SONDER’ lights extravaganza – the letters of the Sonder logo on the front actually light up, like they're breathing, as you vape which not only looks cool but the colour of the light indicates your battery level:
  • Red: less than 30% charge left.
  • Blue : 30-60% charge left.
  • Green: more than 60% charge left.
• 1000mAh battery – vape at least a whole day before recharging!

Quick-filling Q Pod Cartridge

Maybe that’s what the ‘Q’ stands for in the Geek Vape Q Pod Cartridge – quick top-fill so you don’t need to remove the pod to fill from the bottom (or side like the Sonder U Pod Kit). If you’ve ever used a bottom-filling pod kit, you’ll know that it can sometimes get a little annoying. Keep reading to find out more about the Q Pod’s top fill and other features:

• Smooth, mellow vapour flavour – the built-in 0.8 ohm coil of the Q Pod Cartridge gives you decent vapour flavour with low vape clouds.
• Comfort for your lips – the black duck-billed mouthpiece has a tapered, slim top edge that suits your lip shape.
• Secure connection – magnets keep your Geek Vape Q Pod in place.
• 2mL e-liquid capacity – won’t need re-filling too often with the low-wattage vaping of the Sonder Q Pod Kit (unless you chain-vape).
• Super-convenient top fill – push back or snap off the black mouthpiece while the Q Pod is still connected to the Sonder Q Battery and fill with vape juice via the black, membrane-covered fill port (not centre hole).
• Disposable – keep refilling the Q Pod Cartridge until you experience excessive e-liquid leaking, bad taste, or significantly less vape cloud production. This means the built-in coil has reached the end of its relatively short life so you just replace the whole GeekVape Q Pod Cartridge. Easy.
• Use Q Pod with more than one kit – the GeekVape Wenax Q Pod Vape Kit is also compatible with Q Cartridges so you can have fun using both devices with one pod type!
• Get warmer or cooler vapour - the included 0.8 ohm produces warm vapour but you can purchase the following to change your vape draw:
• 0.6 ohm (sold separately): warmer vapour production, slightly higher wattage, increased vapour production and flavour, better for RDL vaping (may go through battery a little faster).
• 1.2 ohm (sold separately): cooler vapour production, lower wattage, less vapour production (battery may last longer).
• MTL vaping – the low-wattage, higher-resistance built-in coil of the Q Pod, combined with the adjustable airflow of the Sonder Q Battery, let you loosely or tightly MTL vape, where you hold vapour in your mouth, then inhale to the lungs (as you’d smoke a ciggie but without the stank).
• Restricted direct-lung (RDL) – when you fully open the airflow, you’ll get very restricted DL draws (looser draw where you inhale vapour directly to your lungs, bypassing the mouth, like breathing in).

Please note:

• A charging cable is not included in the kit so if you don’t have one, pick up a Type C charging cable with your order.
• Purchase some Geek Vape Q Pod Replacement Cartridges with your order as the kit only comes with one pod and it’ll need replacing.
• Q Pod Cartridges cannot be used with the original Geek Vape Sonder Pod Kit.
  
• It's essential to prime new pods before vaping.
  1. Remove black mouthpiece from pod.
  2. Fill pod with vape juice.
  3. Put the black mouthpiece back on the pod.
  4. Cover the air holes at the bottom of the pod with your finger while gently taking about five short draws on the mouthpiece. This draws e-liquid to the built-in coil’s cotton to saturate it and avoids getting dry hits or prematurely burning your coil. You can also let it sit for five minutes.
  5. Install the pod on the battery and vape.

Geek Vape Sonder Q Pod Kit Specifications:

• E-liquid capacity: 2mL
• Battery capacity: 1000mAh (built-in)
• Charging port: Type-C
• Built-in coil resistance: 0.8 ohm
• Power output: 5-20W
• Weight: 39.1g
• Working temperature: -20-60℃
• Top fill
• Adjustable airflow – tailor your draw
• Breathing ‘SONDER’ battery indicator lights
• Auto draw
• RDL and MTL vaping
• Compatible with Geek Vape Q Cartridge Pod Replacements
  
• Overtime protection: device stops if draw longer than 10s
• Short circuit protection
• Low battery protection

Package Includes:

• Geek Vape Sonder Q Battery
• Geek Vape Q Pod Cartridge (0.8 ohm)