VooPoo Vinci 2 Mod Pod Kit

Vinci 2 Mod Pod Kit by VooPoo is a 50W vape kit with a huge 6.5mL vape juice capacity Vinci 2 Pod which is extremely generous for pod kit! The Vinci 2 Pod Kit is also compatible with replaceable VooPoo PnP Coils for that great vapour flavour and satisfying vape cloud production which you can enjoy in the intelligent Smart Mode that recognises your coil, sets the wattage and doesn’t let you exceed the coil wattage recommendation.

Vinci 2 Mod saves your coils

The VooPoo Vinci 2 has the Gene 2.0 Chip which among other things, provides you with a selection of two modes for you to enjoy your vaping, Smart and RBA Modes. Check out how these modes contribute to the satisfying vaping experience of the Vinci 2 and more of its fine features, such as:

• Smart Mode – recognises the coil installed, sets the wattage and while it allows you to adjust the wattage, won’t let you to go beyond the recommended wattage range of the coil. This will avoid accidentally burning your coil
• RBA Mode – lets you use the full 50W of the Vinci 2, as you like
• Type C fast charging – port is on side so it can charge up-right
• beautiful body – single grain, single coating process that allows light to refract and reflect back and forth in the different coating textures to create a bright and transparent colour effect
• adjustable airflow to tailor your vapour production and tighten/loosen your draw
• dual display types – change between a horizontal or vertical display
• bright screen to display vape settings clearly
• 1500mAh built-in battery which should last you most of the day on the lower-wattage coil
• quick-lock feature that locks all Vinci 2 buttons by pressing the fire and plus button together
• rubber grip at bottom of the device for secure standing.

Mammoth-sized Vinci 2 Pod!

The 6.5mL VooPoo Vinci 2 Pod holds enough e-liquid to minimise the amount of times you top up your e-liquid. Of course, that depends on the wattage and amount you vape but it’s larger than some regular, sub ohm vape tanks on the market! The Vinci 2 Pods also feature:

• replaceable VooPoo PnP Coils which are renowned for their impeccable vapour flavour and cloud production (only compatible with PnP Coils that require 50W or less)
  
• easy coil replacement from bottom of pod (pull out old, plug in new)
• simple side-fill via plug-covered, large fill port
• secure magnetic connection to Vinci 2 Mod
• mouth-to-lung (MTL) vaping with lower-wattage coils, a restricted draw where you hold vapour in your mouth briefly before inhaling to the lungs (may not be as restricted with the duck-bill mouth piece).

Other Vinci Pod Kits you may like

VooPoo has a few other Vinci Pod Kits you may like depending on the vape features you prefer.

• Vinci X 2 Pod Mod Kit is the exact same as this Vinci 2 Kit but with 80W and an interchangeable 18650 battery
• Vinci Pod Kit is the easiest of the Vinci Pod Kits with good flavour, no buttons or settings, much smaller body, auto-draw vaping and disposable 2mL pods.
• Vinci 3 Pod Mod Kit has a thinner body, 4mL pods, adjustable airflow wheel, adjustable wattage, top fill, replaceable PnP Coils and a built-in 1800mAh battery.

Please note:

• As the Vinci 2 Pod Mod Kit is a 50W vapouriser, please make sure you only purchase replacement VooPoo PnP Coils that require 50W or less to operate.
• It's essential to prime new coils before vaping.
  1. Place a few drops of vape juice in the coil centre.
  2. Install the coil in the pod.
  3. Fill pod with vape juice.
  4. Cover the air holes at the bottom of the pod with your finger while gently taking about five short draws on the mouthpiece. This draws e-liquid to the coil’s cotton to saturate it and avoids getting dry hits or prematurely burning your coil.
  5. Install the pod on the battery/mod and vape.

Voopoo Vinci 2 Mod Pod Kit Specifications:

Pod

• Vapour e-juice capacity: 6.5mL
• Material: PCTG (BPA-free plastic)
• Resistance: 0.3 ohm - (PnP-VM1), 0.8 ohm - (PnP-TM2)
• Only compatible with VooPoo Vinci 2 Pods

Mod

• Material: zinc alloy
• Output power: 5-50W
• Output voltage: 3.2-4.2V
• Resistance: 0.15-3 ohm
• Battery capacity (built-in): 1500mAh
• Size: 106 x 27 x 28mm
• Weight: 115g

Package Includes:

• VooPoo Vinci 2 Device
• VooPoo 6.5mL Vinci 2 Pod Cartridge
• PnP-VM1 0.3 ohm Coil (32-40W)
• PnP-TM2 0.8 ohm Coil (12-18W)
• USB Type-C charging cable
• User manual