Vinci 2 Mod Pod Kit by VooPoo is a 50W vape kit with a huge 6.5mL vape juice capacity Vinci 2 Pod which is extremely generous for pod kit! The Vinci 2 Pod Kit is also compatible with replaceable VooPoo PnP Coils for that great vapour flavour and satisfying vape cloud production which you can enjoy in the intelligent Smart Mode that recognises your coil, sets the wattage and doesn’t let you exceed the coil wattage recommendation.
Vinci 2 Mod saves your coils
The VooPoo Vinci 2 has the Gene 2.0 Chip which among other things, provides you with a selection of two modes for you to enjoy your vaping, Smart and RBA Modes. Check out how these modes contribute to the satisfying vaping experience of the Vinci 2 and more of its fine features, such as:
- Smart Mode – recognises the coil installed, sets the wattage and while it allows you to adjust the wattage, won’t let you to go beyond the recommended wattage range of the coil. This will avoid accidentally burning your coil
- RBA Mode – lets you use the full 50W of the Vinci 2, as you like
- Type C fast charging – port is on side so it can charge up-right
- beautiful body – single grain, single coating process that allows light to refract and reflect back and forth in the different coating textures to create a bright and transparent colour effect
- adjustable airflow to tailor your vapour production and tighten/loosen your draw
- dual display types – change between a horizontal or vertical display
- bright screen to display vape settings clearly
- 1500mAh built-in battery which should last you most of the day on the lower-wattage coil
- quick-lock feature that locks all Vinci 2 buttons by pressing the fire and plus button together
- rubber grip at bottom of the device for secure standing.
Mammoth-sized Vinci 2 Pod!
The 6.5mL VooPoo Vinci 2 Pod holds enough e-liquid to minimise the amount of times you top up your e-liquid. Of course, that depends on the wattage and amount you vape but it’s larger than some regular, sub ohm vape tanks on the market! The Vinci 2 Pods also feature:
- replaceable VooPoo PnP Coils which are renowned for their impeccable vapour flavour and cloud production (only compatible with PnP Coils that require 50W or less)
- easy coil replacement from bottom of pod (pull out old, plug in new)
- simple side-fill via plug-covered, large fill port
- secure magnetic connection to Vinci 2 Mod
- mouth-to-lung (MTL) vaping with lower-wattage coils, a restricted draw where you hold vapour in your mouth briefly before inhaling to the lungs (may not be as restricted with the duck-bill mouth piece)
- cooler vape.
Alternative Vinci Pod Kits you may like
VooPoo also has a couple of other Vinci Kits that you may like depending on the vape features you prefer. If you want:
- the exact same Vinci 2 Kit but with 80W and an interchangeable 18650 battery, go for the VooPoo Vinci X 2 Pod Mod Kit
- good flavour but way more simple than the Vinci 2 Kits, check out the VooPoo Vinci Pod Kit, it’s a surprisingly good, super simple pod kit with no settings to worry about.
- As always, remember to prime new coils. Place a few drops of e-liquid in the coil before installing to saturate the cotton and avoid getting dry hits.
- As the Vinci 2 Pod Mod Kit is a 50W vapouriser, please make sure you only purchase replacement VooPoo PnP Coils that require 50W or less to operate.
Voopoo Vinci 2 Mod Pod Kit Specifications:
- Vapour e-juice capacity: 6.5mL
- Material: PCTG (BPA-free plastic)
- Resistance: 0.3 ohm - (PnP-VM1), 0.8 ohm - (PnP-TM2)
- Material: zinc alloy
- Output power: 5-50W
- Output voltage: 3.2-4.2V
- Resistance: 0.15-3 ohm
- Battery capacity (built-in): 1500mAh
- Size: 106 x 27 x 28mm
- Weight: 115g
- VooPoo Vinci 2 Device
- VooPoo 6.5mL Vinci 2 Pod Cartridge
- PnP-VM1 0.3 ohm Coil (32-40W)
- PnP-TM2 0.8 ohm Coil (12-18W)
- USB Type-C charging cable
- User manual