Vaporesso XROS Replacement Pods

XROS Replacement Pods (2 or 4 pack) by Vaporesso are suitable for 2mL or 3mL of e-juice with high vegetable glycerin (VG) concentration. The cotton inside the 0.6, 0.7, 0.8 mesh, 1.0 and 1.2 ohm built-in coils of the disposable Vaporesso Xros Pods performs outstandingly in enhancing vapour flavour and delivering perfect mouth-to-lung (MTL) draws (similar to those old smokes) and even restricted direct-lung (RDL) draws (drawing straight to lungs) with the Xros 3 0.6 ohm pod.

Vaporesso Xros Pods are compatible with the:

• Xros Pod Kit
• Xros Mini Kit (Not compatible with 0.7 ohm or Xros 3 0.6 ohm pods.)
• Xros 2 Pod Kit
• Xros Nano Pod Kit
• Xros 3 Nano Pod Kit
• Xros 3 Pod Kit
• Xros 3 Mini Pod Kit
• Xros Cube Pod Kit
• Xros PRO Pod Kit.

Xros Series Pod features

Vaporesso updated the 2mL vape juice capacity, 1.2 ohm Xros Pod to provide a tighter, more realistic mouth-to-lung (MTL) vaping experience. They have achieved this with their SSS leak-resistant technology in the Xros Pod which stands for:

• seal comprehensively with the o-rings that keep the air pressure in for a tighter draw
• store safely with extra seal that may prevent leaking while not in use
• saturate properly via the large coil openings to the cotton to avoid burning the coil or getting a dry hit (aka helps prime coil and keep the cotton wet while vaping).

More features of the Xros Pods include:

• Simple top fill of 0.6, 0.8, 1.0 and 1.2 ohm pods – simply push the black mouthpiece of the Xros Pod away from you (at the longer side) and it’ll clip off to reveal a fill port with a red-coloured membrane which also helps reduce leakage.
• Side fill 0.6, 0.7 & 0.8 ohm pods - lift red rubber plug on side to reveal e-liquid filling port.
• Magnets keep it safe – the strong magnetic connection means your pods stay in place unless you physically pull them out.
• Disposable – once the Xros Pod stops giving you that delicious vapour flavour or producing much vape clouds, it’s time to throw the whole thing away and replace it with a new one.
• 2mL e-liquid capacity – plenty for the low-wattage vaping of Xros Pod Kits.
• 3mL vape juice capacity in the listed 3mL pods only.
• MTL vaping – a restricted draw like that of the old cancer sticks, where you hold the vapour in your mouth after drawing before inhaling to your lungs. You can expect a loose to tight MTL draws which you can tailor by selecting different resistance (ohm) pods:
• 1.2 ohm pods deliver cool vapour at 10W and the tightest MTL draw with good vapour flavour.
• 1.0 ohm pods deliver a very slight boost in vapour warmth at 12W and a tight MTL draw with good vapour flavour.
• Xros 3 1.0 ohm pods deliver a boost in vapour warmth but mostly cool at 12W and a tight MTL draw with good vapour flavour. Includes Corex Technology for rapid, even heating of e-liquid and longer lifespan of pod.
  
• 0.8 ohm pods deliver warm vapour at 16W and a loose MTL draw with a boost in vapour flavour.
• 0.7 ohm pods deliver warm vapour at 18W and a loose MTL draw with a good boost in vapour flavour.
• RDL vaping - a looser draw that's like breathing in through your mouthpiece, taking vapour straight to your lungs.
• Xros 3 0.6 ohm pods deliver the warmest vapour of the lot at 21W with the highest boost in vapour flavour. Includes Corex Technology for rapid, even heating of e-liquid and longer lifespan of pod.
  

Please note:

• Xros 3 0.6 ohm and 0.7 ohm Xros Pods are not compatible with Vaporesso Xros Mini Vape Kit.
• Remove and dispose of the plastic strip at the bottom of new pods before using.
• It's essential to prime new pods before vaping.
  1. Remove the black mouthpiece (push it off).
  2. Fill with vape juice.
     
  3. Put the black mouthpiece back on the pod.
  4. Cover the air holes at the bottom of the pod with your finger while gently taking about five short draws on the mouthpiece. This draws e-liquid to the coil’s cotton to saturate it and avoids getting dry hits or prematurely burning your coil. You can also let it sit for five to 10 minutes.
     
  5. Install the pod on its battery and vape.

Vaporesso XROS Replacement Pod Specifications:

• E-liquid capacity: 2mL / 3mL
• 2 or 4 pod replacements per pack
• Smooth airflow
• Easy top filling or side filling
  
• Compatible with all Vaporesso Xros Pod Kits
• XROS Series features updated SSS Leak-Resistant Tech

Package Includes:

• 2 x Vaporesso XROS Series Pods
  or
• 4 x Vaporesso XROS Series Pods