The Vaporesso Xiron Pod Mod Kit is all the vapouriser you need for a simple, satisfying, flavoursome vape experience! You get all the vapour-flavour perks from vaping your vapour e-liquid with the Vaporesso GTX Coils that it’s compatible with. These coils are easily replaced from the bottom of the Xiron Pod which has a removeable 510 mouth piece (drip tip), a see-though body to easily how much vapour e-juice you have left and adjustable airflow!
Plus, even with its maximum 50W output, you can direct-lung (DL) vape this all-in-one vapouriser kit. Double plus, you get a menu with a few simple settings to choose from so you can slightly tailor your vape. So… Large clouds, great flavour, quality build, versatility and a 5.5mL e-liquid capacity pod! This is the mother of pod kits.
Smart Wattage mode saves your coils
The Vaporesso Xiron has a few settings to choose from but Smart Wattage has to be the best. It intelligently recognises the GTX coil you have inserted and starts you off on the lowest wattage the coil can handle. This ensures you ease in to using your coil which maximises coil longevity.
By the way, you choose the settings from a neat, OLED display screen menu that isn’t overwhelming to navigate through.
Speaking of coils, the Xiron Pod Mod Kit comes with two coils:
- Mouth-to-lung (MTL) 0.8 ohm coil for vaping like you would draw on a traditional cigarette – tight draw that is held in the mouth before inhaling to the lungs.
- DL 0.3 ohm coil for taking in vapour like you take in a deep breath – straight to the lungs. This is where you get the biggest clouds!
Tip: When you purchase replacement Vaporesso GTX Coils for your Xiron Pod Kit, make sure you select coils that are compatible with this device (GTX 0.2ohm V2 are not compatible)
You have the added bonus of a 1500mAh built-in battery that’ll last you most of the day, depending on the coil you use and how much you vape. At higher wattage, with lower resistance coils, like the 0.3 ohm GTX Coil, you will need to charge it sooner than if you were using the 0.8 ohm V2 coil that requires lower wattage. Either way though, you’ll be charged up quickly with the USB Type C fast charge of the Xiron Kit.
Top fill and adjustable airflow
You don’t see this often – a pod kit with adjustable airflow! This means that you can vape this kit with as tight or loose of a vape as you prefer. Simply turn the round airflow adjuster on the side of the Xiron to increase or decrease the airflow.
Vaporesso thought of everything when designing this kit, including having a convenient plug-covered top fill port so you don’t have to remove your Xiron Pod to refill it with 5.5mL of vapour e-liquid. Yes, this amount of e-liquid should last you a night out. You’ll know when you need to top up too because the majority of the pod is completely transparent.
If you happen to not like the drip tip that the Xiron Pod comes with, don’t worry, it is removeable. Check out our large range of 510 drip tips and choose one you like better.
The Xiron Pod Mod Kit is also built incredibly well so it's sturdy. The pod is connected magnetically and unless you physically pull it out to change a coil, that thing isn’t going anywhere on its own. Simply turn the Xiron off when you’re putting it in your pocket or bag and there’s nothing else you need to worry about.
Vaporesso Xiron Pod Mod Kit Specifications:
- Dimensions: 93 x 46 x 28mm
- Display: 0.69” TFT Screen
- Battery: built-in 1500mAh
- Resistance : GTX 0.8 ohm mesh coil (12–20W) & GTX 0.3 ohm mesh coil (32-45W)
- Power output: 5-50W
- Charging current: 2A
- USB Type C
- E-juice capacity: 5.5mL
- Vaporesso Xiron Battery
- Vaporesso Xiron POD (5.5mL)
- GTX 0.8 ohm Mesh Coil
- GTX 0.3 ohm Mesh Coil
- Spare mouth piece (drip tip)
- Type-C USB Cable
- User manual
- Warranty card
- Reminder card
Customer ReviewsWrite a review
Got here fine very quick works great slight leak but it’s ok for now