Target 80 iTank Kit by Vaporesso is an 80W direct-lung (DL) vaping kit with features that’ll enrich your vape life. The Vaporesso iTank brings you 5mL of vape juice, Turbo Airflow from three inlet holes and Vaporesso GTi Coils that hide inside a good-looking chamber. The iTank is matched with a Target 80 Mod whose 80W is powered by a built-in 3000mAh battery, a cage-like frame for extra drop protection, quick-lock feature and a Smart Mode that detects your coils and sets a recommended wattage for you!

A Target 80 Mod with a face

Yes, a face. We’re not sure if Vaporesso did this on purpose but the wattage buttons, menu button and Type C charge port look like a little face is looking at you… The Target 80 Mod face adds nothing to its vaping features but once we noticed it, we couldn’t not share it with you! Vape-wise, the Vaporesso Target 80 Mod is naturally pretty impressive which is expected from Vaporesso, with its:

  • DL vaping capability – supported by a 5mL iTank with ample tri airflow, high-wattage coils, 80W of power and a decently-sized battery.
  • Three-click wattage button lock – locks wattage buttons with three clicks of the fire button so you don’t accidentally change your wattage and burn your coil but still allows you to vape.
  • 80W – enough to support the high-wattage Vaporesso GTi Coils.
  • 3000mAh battery – built-in so you don’t have to muck around with switching batteries.
  • Quick fire without delay.
  • Great build quality – true to Vaporesso’s style, you can expect perfection in design and materials used.
  • Grip panels – waterproof braided material (fabric) is used for the coloured panels of the Target 80 Mod that are pleasing to the eye, and provide comfort and grip for your hands.
  • Protected cage-like frame to minimise damage if dropped.
  • Variable Wattage levels – lets you choose how you want your Target 80 Mod to fire:
    • Hard: fires at slightly higher wattage and works its way down to your set wattage through puff; a burst of power at the begging.
    • Normal: fires at your set wattage through puff.
    • Soft: fires at slightly lower wattage and works its way up to your set wattage through puff; might prolong the life of your coil.
  • Separate menu button – includes two ways to access and change modes:
    • Press and hold: keeps you on the main display, allows you to quickly change from Pulse, F (t) and Variable Wattage Normal Modes.
    • Press three times: takes you to menu where you can select DIY for more advanced vaping modes (Variable Wattage levels, Bypass and Variable Voltage) or select Smart Mode so your Target 80 Mod can detect your coil and set a recommended wattage.

Sooooo much airflow from the iTank

If you like to vape like you breathe, the Vaporesso iTank will serve you well with its Turbo Airflow that comes in from not one but three air holes which you can also adjust! That’s right, the iTank is a DL vaper’s dream that also features:

  • A coil-hiding chimney – a metal chamber in the centre of the tank hides the Vaporesso GTi Coils that makes this tank incredibly good-looking.
  • Less vape juice leakage – the iTank’s E-liquid Self-circulating system draws in condensation in the tank and vapourises it so that you don’t have to worry about big leaks from the bottom of the tank.
  • Flavoursome vaping – the high-wattage, mesh Vaporesso GTi Coils will satisfy your taste buds.
  • Simple coil changing – unscrew the base of the tank and simply pull out the old coil and replace it with a new, primed coil and get back to vaping quickly.
  • Push to fill – no more unscrewing of the top cap! Just push the cap at the arrow and the iTank will graciously open up to reveal a relatively large fill port that’s covered by a rubber membrane to prevent leakage.
  • 25mm diameter – although the diameter is about 26mm further up, the iTank will still suit many other mods with its universal size.
  • A removeable 510 drip tip – easily upgrade, replace or clean your iTank mouth piece.
  • 5mL e-liquid capacity that you can upgrade to 8mL by purchasing a bubble glass separately.

Fancy more power and battery capacity?

You’re in luck because Vaporesso is very thoughtful about its vapers! Check out the three Target iTank Kits (including this one) with different power, e-liquid capacity and battery capacity. All Target iTank Kits however share the same, intelligent vaping performance.

  • Target 200 iTank Kit – twin 18650 battery compatibility, 220W and huge 8mL iTank.
  • Target 100 iTank Kit – 18650 or 21700 battery compatibility, 100W and 5mL iTank.
  • Target 80 iTank Kit (the one you’re looking at right now) – 3000mAh built-in battery, 80W and 5mL iTank.

Choices, choices, choices is what Vaporesso offers you with either one of the quality Target iTank Kits. The Target 80 iTank Kit specifically offers you DL vaping in a smaller body with a decent battery and the same, flavoursome Vaporesso GTi Coils. Oh and all those awesome Target 80 Mod features. What’s there not to like?

Please note:

  • As always, remember to prime new coils. Place a few drops of vape juice in the coil, install the coil and wait five minutes before using. This ensures the coil is saturated and avoids getting dry hits.
  • The Target 80 iTank Kit is not water, dust and shock proof. Only the material panels are waterproof.
  • We don't recommend this kit for beginner vapers or those who prefer mouth-to-lung (MTL) vaping (similar to a cigarette puff where you hold vapour in your mouth, then inhale to the lungs which requires lower wattage).

Vaporesso Target 80 iTank Kit Specifications

  • 138.8 X 38.3 X 30.8mm
  • Display: 0.96 inch OLED screen
  • Charge current: 2A via Type-C port
  • Battery: built-in 3000mAh
  • Output wattage: 5-80W
  • 5mL e-liquid capacity
  • Only compatible with Vaporesso GTi Coils
  • 510 thread
  • Turbo Airflow (tri airflow)
  • Push to fill
  • Protections: short circuit, low voltage, no load, over temperature, overtime and low power.

Package includes

  • Vaporesso Target 80 Mod
  • Vaporesso iTank (5mL)
  • GTi Meshed Coil 0.2 ohm (60-75W)
  • GTi Meshed Coil 0.4 ohm (50-60W)
  • Extra glass tube (5mL)
  • 3 x O-rings
  • Type-C USB charging cable
  • User manual
  • Warranty card
Vaporesso | Vape World Australia | Vaping Hardware

Customer Reviews

Based on 1 review
John Di Carlo
Looks really good at night

Pretty easy for a beginner to assemble, heaps of youtube tutorials on it.
the smart vape feature seems to help tune to suit my liking, the itank is so easy to use and fill, just remember it is a reverse thread to remove mouth pieces, tricky at first. I haven't used it mobile so leaks I can't advise, but hasn't leaked at home yet.

Vaporesso Target 80 Kit with iTank


You may also like