SMOK THINER Pod Kit | Vape World Australia | Vaping Hardware

SMOK THINER Pod Kit Silver Red | Vape World Australia | Vaping Hardware

SMOK THINER Pod Kit Blue Purple | Vape World Australia | Vaping Hardware

Brand: SMOK

SMOK THINER Pod Kit

Name: SMOK THINER Pod Kit
Brand: SMOK
SKU: 100740-100701
Price: 26.95 AUD
Availability: InStock
Rating: 5.0 (2 reviews)

Thiner Pod Kit by SMOK takes compact vape kits to another level with its credit-card-like looks and dimensions. Easily slide the 8.8cm tall SMOK Thiner Pod Kit in your pocket and enjoy mouth-to-lung (MTL) vaping, like draw of the old ciggies, all day with the Thiner Pod Kit’s 700mAh internal battery. The disposable SMOK Thiner Pod is just as intriguing with its corner mouthpiece, decently-large 4mL vape juice capacity and built-in 0.8 ohm coils for warm, draw-activated vapour production.

Just draw to vape Thiner Pod Kit

The SMOK Thiner Mod has a draw sensor that turns on the vapouriser to produce lovely vapour when it senses you drawing on the mouthpiece. So, no buttons to hold when you want to vape; just draw and enjoy! More simple features of the SMOK Thiner Mod or Battery include:

Compact, pocket-friendly size – almost the size of a credit card but a little thicker; easily and discretely fits in your pocket, bag and maybe even a ladies evening clutch.
Super-simple to use – no menus or modes to select, just fill pod with e-juice, set your wattage and draw to vape.
One button is all you need – one small, black power button is used to turn the SMOK Thiner Mod on/off (five clicks) and change wattage (three clicks).
Adjustable wattage – increase or decrease the intensity of your vapour flavour by increasing or decreasing your wattage (keeping in mind the ‘best at wattage’ written on the pod). Press the power button three times and when the wattage numbers on the screen flash, press the power button again to scroll through the wattage.
Clear display – easy to see your settings such as wattage or battery level.
Built-in 700mAh battery capacity – good for vaping all day on lower wattage but if you chain vape, it may not last all day. Simple solution in this case would be to just buy two Thiner Pod Kits. ;)
Rounded edges for comfy hold.
Type C charging port.

Thiner Pod as flat as the mod

It’s hard to image that any vapouriser this flat could actually hold that much e-liquid or even have a decent coil but alas, the SMOK Thiner Pod, has everything a regular vape pod does and even more e-liquid capacity than most. Check out the other Thiner Replacement Pod features and continue to be amazed at what it can do for its size:

0.8 ohm built-in coils – produce nice, warm vapour at low wattage.
Good vapour flavour – you can increase vapour flavour by increasing wattage.
Huge 4mL vape juice capacity – seriously surprising for such a small pod!
- Usage tip: Ensure your e-liquid level doesn’t fall below the minimum fill level line (labelled ‘min’ on the pod) so you don’t get dry hits or burn the coil.
Low vape cloud production for discrete vaping.
Thin bore of corner mouthpiece – clever to place the mouthpiece hole in the corner of this very flat SMOK Thiner Pod as it’s more comfortable for your lips than if it was positioned on the flat top edge. The thin bore is great for those restricted MTL draws.
Easy side-fill – remove Thiner pod from battery, lift the bright, red, rubber door to reveal the fill port that’s suited to e-liquid bottles with thin nozzles.
Disposable – maintaining the Thiner Pods couldn’t be easier because you literally throw them out when the coil is no longer good (when excessive leaking, bad vapour flavour, burned taste, for example).
MTL vaping – enjoy restricted draws, similar to the draw of those cancer sticks, where you draw vapour to your mouth and hold, then inhale to the lungs. The small airflow inlet of the Thiner Mod, coupled with the low-wattage, high-resistance built-in coils and thin bore mouthpiece, all scream ‘MTL-vape me!’.

The SMOK Thiner Pod Kit is great for beginner vapers as it’s pretty easy to use but also handy for all us vapers as a kit that doesn’t take up too much space in your bag or pocket when you’re on the go. Also, it helps if you like MTL vaping.

Please note:

As you only get one pod in the kit, it might be good to get a pack of SMOK Thiner Replacement Pods with your kit because you can’t put all your vape eggs in one pod basket and pods will need replacing eventually.
There is a protective sticker at the bottom of new pods that you must remove before vaping or your vape won’t work.
You need to prime new pods before using so you don’t get dry hits or burn your coil too quickly. Prime your pod by filling it with vape juice and waiting about five minutes for the e-liquid to soak the coil’s cotton before vaping.